HPE FlexFabric 12900E Series Configuration Manual page 74

* no decompiling or reverse-engineering shall be allowed.
******************************************************************************
<MDCB> system-view
# Bring up HundredGigE 1/3/0/1 and HundredGigE 2/3/0/1.
[MDCB] interface range hundredgige 1/3/0/1 hundredgige 2/3/0/1
[MDCB-if-range] undo shutdown
[MDCB-if-range] quit
# Assign an IP address to the management interface and configure Telnet login.
[MDCB] display interface m-gigabitethernet brief
Brief information on interfaces in route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface
M-GE1/0/0/0
M-GE1/0/0/1
M-GE1/0/0/2
M-GE1/0/0/3
[MDCB] interface m-gigabitethernet 1/0/0/2
[MDCB-M-GigabitEthernet1/0/0/2] ip address 192.168.1.252 24
[MDCB-M-GigabitEthernet1/0/0/2] quit
[MDCB] telnet server enable
[MDCB] user-interface vty 0 63
[MDCB-line-vty0-63] authentication-mode none
[MDCB-line-vty0-63] user-role mdc-admin
[MDCB-line-vty0-63] return
# Return to the default MDC.
<MDCB> switchback
[IRF]
Verifying the configuration
1. Verify that the MDCs exist and are operating correctly.
[IRF] display mdc
ID
1
2
3
The output shows that the MDCs have been created and are operating correctly.
2. Display IRF link information.
[IRF] display irf link
Member 1
IRF Port
1
2
Member 2
IRF Port
1
Link Protocol Primary IP
DOWN DOWN
DOWN DOWN
UP UP
DOWN DOWN
Name Status
Admin active
MDCA active
MDCB active
Interface
HundredGigE1/2/0/1(MDC1)
HundredGigE1/3/0/1(MDC3)
disable
Interface
disable
Description
--
--
--
--
Status
UP
UP
--
Status
--
70
*