Advertisement
Table of Contents
Ensure the dust barrel is properly installed.
•
Make sure the power supply is 220-240V, 50/60Hz.
•
Do not vacuum up liquids or flammable materials.
•
Do not vacuum up burning materials or ashes.
•
Do not vacuum up shards of broken glass.
•
Do not use the vacuum without a motor protection filter installed.
•
Please change the dust barrel immediately if it is damaged.
•
Do not let children use the vacuum.
•
If you experience any unusual sounds, smells, smoke or any other signs of
•
failure or breakage during operation, switch the vacuum off and unplug it.
Do not attempt to repair the unit yourself. Contact the Kogan customer
support team.
If the power supply cord is damaged, if must be replaced by a Kogan
•
service technician or a qualified electrician to avoid a shock/fire hazard.
1
Advertisement
Table of Contents
Related Manuals for Kogan KAVACCYC2WA
Summary of Contents for Kogan KAVACCYC2WA
- Page 1 Do not attempt to repair the unit yourself. Contact the Kogan customer support team. If the power supply cord is damaged, if must be replaced by a Kogan • service technician or a qualified electrician to avoid a shock/fire hazard.
- Page 3 Vacuum inlet Carry handle Dust barrel Barrel release button ON/OFF button Power cord retract button Power regulator switch Wheel Power plug and cord Air outlet 1. Connect the hose accessories: insert the hose end into the vacuum inlet (fig 1). 2.
- Page 4 Fig 1 Fig 2 Fig 3 Fig 4 Fig 5 Fig 6 when the barrel is full of dust, dirt and rubbish: 1. press the barrel release button (fig 1) 2. remove the clear plastic barrel and inner barrel (fig 2) 3.
Need help?
Do you have a question about the KAVACCYC2WA and is the answer not in the manual?
Questions and answers