Installation Instructions - Envirovent energiSava 200 Installation Manual

Installation Instructions

Control Options
Frost Protection
When the cell temperature in the unit falls
below 5°C the unit automatically warms the
cell with extracted air to prevent the formation
of frost.
Boost - Switch Live
The energiSava® 200 comes with Switch Live as
standard. It is an automatic function, sending
the unit to boost when the bathroom or kitchen
light is on.
Summer Bypass
The summer bypass helps reduce the air
temperature coming into the dwelling during
the summer months. It is an automatic function
and operates when the supply air temperature
to the property is above 25°C.
5
energiSava® 200
Intellitrac Humidity Tracking
®
When the energiSava® 200 unit senses a rise
in humidity, caused by increased moisture
generation such as through cooking or
showering, the extract and supply airflows will
slowly begin to increase in direct proportion to
the increase in humidity.
It will then automatically track back down again
when humidity falls. This controls condensation
quietly and efficiently.
Boost - Remote Control
The energiSava® 200 unit also comes with
a remote control switch or app which can be
used at any time to send the unit to boost (see
page 13).
Control Options
Frost Protection
Boost Switch Live
Mechanical Summer
Bypass
Humidity Tracking
Boost - Remote Control
SHOULD YOU ENCOUNTER ANY PROBLEMS
INSTALLING THIS UNIT, CALL US ON:
✓
✓
✓
✓
✓
0345 27 27 810