Envirovent energiSava 200 Installation Manual page 10

Installation Instructions
SECOND FIX CONT.
Connect 22mm PVC drain fitting
5. The drainage from the unit may be
connected to an internal waste water
system or soil pipe with an appropriate
non-return device. One way valve device
is recommended. Insulate pipes in an
unheated loft space
9
energiSava® 200
Floor mounting
6. The unit can be floor mounted in a loft
space with an additional kit. EnviroVent Part
number KITCONDENSATE-ES200. Use the
long and short S brackets provided along
with short fitting screws to ensure correct
drainage. The unit must be higher at the
duct end.
Foam casing
Drain connections should be solvent welded
as here.
SHOULD YOU ENCOUNTER ANY PROBLEMS
INSTALLING THIS UNIT, CALL US ON:
0345 27 27 810