Envirovent energiSava 200 Installation Manual page 5

Thank you for choosing EnviroVent
The fastest growing ventilation company in the UK
You are about to install a product that is designed to outlast the life-cycle of the building. Once
installed the unit will operate continuously for 5 years and beyond without a major service. Please
therefore ensure that this product is treated with care and installed properly i.e. for the life of the
building. If the unit is mishandled you might break it! This invalidates the warranty.
And remember, if you have any problems please call our dedicated Technical Team. We are always
pleased to help and in an emergency will come out to site quickly, completely free of charge.
About the unit
The energiSava® 200 is a whole house heat recovery unit which works by continuously extracting
stale, moisture-laden air from the "Wet Rooms" of the apartment or a house - the kitchen, bathroom
and en-suite rooms - and ducts this to a central unit. This extracted air passes through a high
efficiency counter-flow heat exchanger before being ducted to the outside. Fresh air is drawn into
the unit from outside, which is warmed by the heat exchange cell and delivered into the living, dining
and bedroom areas.
Exploded view
Front cover
Filter
cover
AFTER INSTALLING THIS UNIT,
PLEASE PASS ONTO END USER
Spigot
Heat
recovery cell
Filter & Filter
plugs
Front shell
DO NOT THROW AWAY
Mounting
Bypass
Drain
Motor assembly
Wall
plate bracket
Spacers
Made in Harrogate UK
4