Advertisement
Cable Distance for Switch
The cable distance between the GSD-604HP
and PC/PD devices should not exceed 100
Note
meters for UTP/STP cable.
Make sure the wiring is correct
Category 3/4/5 cable can be used for
10/100Mbps operation. To reliably operate
your network at 1000Mbps, you must use
an Unshielded Twisted-Pair (UTP) Category
Note
5/5e cable, or better data grade cabling.
While a Category 3 or 4 cable may initially
seem to work, it will soon cause data loss.
Step 6: Supply power to the Gigabit PoE+ Switch.
A. Connect one end of the power cable to the Switch.
B. Connect the power plug of the power cable to a
standard wall outlet.
When the Gigabit PoE+ Switch receives power, the
Power LED should remain solid Green.
Wall-mount Installation
Step 1: Please find the wall that can mount the
GSD-604HP.
Step 2: Install four screws on the wall.
- 9 -
Step 3: Hang the GSD-604HP on the screws from the
wall.
Step 4: Repeat step 6 of Desktop Installation for
power supply to the GSD-604HP.
Before mounting the device to the wall,
please check the location of the electrical
outlet and the length of the Ethernet cable.
Note
RJ45
UTP Cable
- 10 -
8. Product Specifications
GSD-604HP
4-Port 10/100/1000T 802.3at
Model
PoE + 2-Port 10/100/1000T
Desktop Switch
Hardware Specifications
6-Port RJ45 for
Network Connector
10/100/1000BASE-T, auto MDI/
MDIX
4-Port with 802.3af/at PoE
PoE Inject Port
injector function (port 1 to port
4)
System: Power (Green)
Per PoE port:
PoE (Orange, port 1 to port 4)
LED Display
PoE MAX (Orange)
Ethernet port:
1000 LNK (Green)
10/100 LNK (Orange)
Store and Forward switch
Switch Architecture
architecture
Thermal Fan
Fanless design
8K MAC address table with auto
MAC Address Table
learning function
Switch Fabric
12Gbps
- 11 -
Switch Throughput
8.92Mpps @64 bytes
Jumbo Packet
9216 bytes
Back pressure for half-duplex.
Flow Control
IEEE 802.3x pause frame for
full-duplex
Power Requirements 55V DC, 1.1A
ESD Protection
6KV DC
Power Consumption
Max. 60 watts, 204.6 BTU
Dimensions
160 x 92.5 x 28mm
(W x D x H)
Weight
374g
Power over Ethernet
IEEE 802.3af Power over
Ethernet/PSE
PoE Standard
IEEE 802.3at Power over
Ethernet Plus/PSE
PoE Power Supply
End-span
Type
Power Pin
1/2(+), 3/6(-)
Assignment
Per Port 54V DC, 300mA. max.
15.4 watts (IEEE 802.3af)
PoE Power Output
Per Port 54V DC, 600mA. max.
30 watts (IEEE 802.3at)
PoE Power Budget
55 watts
- 12 -
Standard Conformance
EMI Safety
FCC Class B, CE
IEEE 802.3
Ethernet
IEEE 802.3u
Fast Ethernet
IEEE 802.3ab
Gigabit Ethernet
Standard
IEEE 802.3x
Flow Control
Compliance
IEEE 802.3af
Power over
Ethernet
IEEE 802.3at
Power over
Ethernet Plus
Environment
Operating
0 ~ 50 degrees C
Environment
Storage
-10 ~ 70 degrees C
Environment
5 ~ 95%, relative humidity, non-
Operating Humidity
condensing
5 ~ 95%, relative humidity, non-
Storage Humidity
condensing
- 13 -
9. Customer Support
Thank you for purchasing PLANET products. You can
browse our online FAQ resource on PLANET Website
first to check if it could solve your issue. If you need
more support information, please contact PLANET switch
support team.
PLANET online FAQ:
http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address:
support_switch@planet.com.tw
Copyright © PLANET Technology Corp. 2015.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All
other trademarks belong to their respective owners.
- 14 -
Advertisement
