3. Click Serial Commands.
4. Find the sv4k.videoMode command
Figure 7. SV-4K Resolution Setting in Display Specifications
5. Specify one of the values in
behavior.
Table 14. SV-4K Resolution Values
sv4k.videoMode Value
1920x1080x60p
1280x720x60p
Not Configured
Auto
6. Click Save.
7. Reboot the SV-4K device.
Network and Switch Planning
This section includes the following topics:
External DHCP Server Requirements, Page 23
l
Connected Stadium Switch Requirements, Page 24
l
External DHCP Server Requirements
The SV-4K media player requires configuration of an external DHCP server to provide
IP addressing to the devices. This service can be configured using Cisco Network
Registrar (CNR) or another external server at the venue.
This section highlights some of the key requirements to plan your DHCP configuration.
However, it does not describe all of the details for you to perform the configuration.
© Cisco Systems, Inc. All rights reserved.
(Figure
7).
Table 14
according to the desired resolution
Resolution
Fixed at 1080p
Fixed at 720p
Auto-detected
Auto-detected
23 of 68