Sv-4K Rs-232 Serial Pinout; Guidelines For Mounting The Sv-4K - Cisco StadiumVision SV-4K Deployment Manual

Audio Cables
Audio cables are not generally needed. However, there are a couple of cases where
you might need to make an audio connection to the SV-4K:
If you need to support an HDMI-to-DVI connection from the SV-4K to the TV since
l
this supports video only.
If you need to connect to external audio distribution equipment when audio is to
l
be distributed within an area.

SV-4K RS-232 Serial Pinout

Table 7 provides the pinout for the DE-9 serial connector on the front panel of the SV-
4K.
Table 7. SV-4K Serial DE-9 Pinout
Pin Description
1 NC
3 Transmit data out of the
device
5 Ground
7 RTS
9 NC

Guidelines for Mounting the SV-4K

Consider the following guidelines before mounting the SV-4K:
Does not fit in Sunbrite cases that might be in use for some Cisco DMP 4310G
l
outdoor deployments.
Full dimensions with mounting brackets:
l
196.20 mm long / 164.15 mm wide / 61.65 mm high
(7.72 in long / 6.46 in wide / 2.43 in high)
Weight: 28 oz / 793.8 grams.
l
Attach to the wall using the brackets on each side of the device using 4 screws
l
(one for each bracket slot) that measure between 3.5 mm and 4.2 mm in diameter.
Avoid blocking the right side panel so that LEDs can be seen for troubleshooting.
l
Ensure all air vents are clear for proper cooling.
l
© Cisco Systems, Inc. All rights reserved.
Pin Description
2 Receive data into the
device
4 Available 5V@500mA
6 NC
8 CTS
7 of 68