Print Settings - Contec ECG1200G User Manual

ECG1200G Electrocardiograph - User Manual
[2.5mm/mV]/[5mm/mV]/[10m
Show Gain m/mV]/[20mm/mV]
/[40mm/mV]
[5mm/s]/[6.25mm/s]/[10mm/s]/[
Show Speed
12.5mm/s]/[25mm/s]/[50mm/s]
Premature(%) 0 ~ 100
Pause Time(ms) 1200 ~ 3000
Tachycardia(bpm
0 ~ 250
)
Bradycardia(bpm
0~99
)

13.10 Print Settings

Select the button in the main interface, the printing setting dialogue box will pop up
shown below.(See Figure 13-13)
Click the button[Default], the print settings will go back to the default.
Each item, its options and explanation are shown in the table below.
Set up the ECG gain in screen.
Set up ECG sweep speed in screen, but
when printing in auto and rhythm
mode , it does not support 5mm/s,
10mm/s, 12.5mm/s.
The system will use the input value as a
standard of judging premature beat.
The system will use the input value as a
standard of judging beat pause.
The system will use the input value as a
standard of judging tachycardia.
The system will use the input value as a
standard of judging bradycardia.
Figure 13-13
28