Upgrade - D-Link DAP-1950 User Manual

Section 3 - Configuration
Firmware upgrades may be provided for the DAP-1950 in the future. This page will allow you to upgrade the router's firmware,
either automatically or manually. To manually upgrade the firmware, you must first download the relevant file from http://support.
dlink.com. To access this page, click the Management drop down menu at the top of the page, and select Upgrade. Click Save at
any time to save the changes you have made on this page.
Current Firmware The current firmware's version will be displayed.
Version
Check for New Click this button to prompt the router to automatically check
for a new firmware version. If a newer version is found, it will
Firmware
prompt you to install it.
Automatic Firmware Upgrade
Automatic Upgrade If enabled, the router will automatically check for and upgrade
to the newest firmware.
Choose Upgrade Time
You may set the DAP-1950 to automatically upgrade its firmware
at a set time by enabling the function. Set the hour and minute
to automatically upgrade by using the drop-down menus.
Upgrade Firmware
If you wish to upgrade manually, first download the firmware
file you wish to upgrade to. Next, click the Select File button to
browse to the file and click Upload to install the new firmware.
D-Link DAP-1950 User Manual
Firmware
Upgrade Manually

Upgrade

38