Perkins 2206F-E13TA Operation And Maintenance Manual page 69

Industrial engine
Hide thumbs Also See for 2206F-E13TA:
Table of Contents

Advertisement

SEBU9071-01
Table 16
Property
UNITS
Aromatics
%Volume
Ash
%Weight
Carbon Residue on 10%
%Weight
Bottoms
-
Cetane Number
(1)
Cloud Point
°C
-
Copper Strip Corrosion
Distillation
°C
(2)
Density at 15 °C (59 °F)
kg/M
Flash Point
°C
-
Thermal Stability
Pour Point
°C
Sulfur
(3)
%mass
Kinematic Viscosity
(4)
MM2/S (cSt)
Water and sediment
% weight
Water
% weight
Sediment
% weight
Gums and Resins
(5)
mg/100mL
mm
Lubricity correctedwear
scar diameter at 60 °C
(140 °F).
(6)
-
Fuel Cleanliness
(7)
Trace Metals
(8)
mg/mg
Oxidation Stability
g/m^3
Hours
(1)
To insure minimum cetane number of 40 a distillate diesel fuel should have minimum cetane index of 44 when"ASTM D4737" test method is
used. A fuel with a higher cetane number is recommended to operate at a higher altitude or in cold weather
(2)
Density range allowed includes summer and winter diesel fuel grades.
(3)
Ultra Low Sulfur Diesel Fuel with sulphur content less than 0.0015 percent 15 PPM (mg/kg) must be used. Use of diesel fuel with higher than
15 PPM sulphur limit in these engines will harm or permanently damage emissions control systems. Also, use of diesel fuel with higher than
15 PPM sulphur limit can shorten service interval.
"Perkins Specification for Distillate Diesel Fuel"
Requirements
35% maximum
0.01% maximum
0.35% maximum
40 minimum
The cloud point must not
exceed the lowest expected
ambient temperature.
No. 3 maximum
10% at 238° C (460.4° F)
maximum
90% at 350° C (662° F)
maximum
3
800 minimum and 860
maximum
legal limit
Minimum of 80% reflec-
tance after aging for 180 mi-
nutes at 150 °C (302 °F)
6 °C (42.8 °F) minimum be-
low ambient temperature
0.0015 % maximum
The viscosity of the fuel that
is delivered to the fuel injec-
tion pump. 1.4 minimum
and 4.5 maximum
0.05% maximum
0.05% maximum
0.05% maximum
10 mg per 100 mL
maximum
0.52 maximum
"ISO 18/16/13"
Max 1 or non-detectable
Max 25
(9)
Min 20
General Fuel Information
"ASTM"Test
"ISO/Other"Test
"D1319"
"ISO 3837"
"D482"
"ISO 6245"
"D524"
"ISO 4262"
"D613 or D6890"
"ISO 5165"
"D2500"
"ISO 3015"
"D130"
"ISO 2160"
"D86"
"ISO 3405"
No equivalent test
"ISO 3675""ISO 12185"
"D93"
"ISO 2719"
"D6468"
No equivalent test
"D97"
"ISO 3016"
"D5453"
"ISO 20846"
"D445"
"ISO 3405"
"D1796"
"ISO 3734"
"D1744"
No equivalent test
"D473"
"ISO 3735"
"D381"
"ISO 6246"
"D6079"
"ISO 12156-1"
"D7619"
"ISO 4406"
"D7111"
"D2274"
"ISO 12205"
"EN 15751"
69
Maintenance Section
(continued)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents