Table of Contents
Advertisement
NOTE:
2.
Insert a screwdriver or similar thin tool into the hole near the fan, and then press on the back of the
keyboard until it disengages from the computer (2).
3.
Position the computer upright with the front toward you.
4.
Open the computer as far as possible.
5.
Rotate the keyboard over and onto the palm rest (1).
NOTE:
pull the keyboard cables out of the system board connectors.
6.
Disconnect the keyboard backlight cable ZIF connector (2) (select models only), pointing stick cable ZIF
connector (3), and keyboard cable ZIF connector (4).
44
Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
The screws are labeled with a keyboard symbol.
Cables connect the bottom of the keyboard to the system board. Make sure not to prematurely
- Quick Links:
- Memory Modules
Hide quick links:
Advertisement
Table of Contents
