Setting The Clock - Roberts R9974 User Manual

Setting the clock

1. The clock will start running when the batteries are installed or when
the radio is connected to the mains supply. The display will show "-:--"
together with the real time symbol .
2. The time can be set with your radio switched on or off.
3. Press and hold down the Time set button until the hours digits fl ash
in the display.
4. Press the Tuning up/down buttons to set the required hour.
5. Press the Time set button, the minute digits will fl ash in the dis-
play.
6. Press the Tuning up/down buttons to set the required minute.
7. Press the Time set button to complete time setting. The colon between
the hour and minute digits will begin to fl ash.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
3
4
4
7
7