Storing Stations In Preset Memories - Roberts R9974 User Manual

Storing stations in preset memories

There are 5 memory presets for each waveband.
1. Press the Power button to turn on the radio.
2. Tune to the required station using one of the methods previously
described.
3. Press and hold down the required preset until the radio beeps (greater
than 2 seconds) The preset number will appear in the display and the
station will be stored under the chosen preset button.
4. Repeat this procedure for the remaining presets.
5. Stations stored in preset memories may be overwritten by following
the above procedure.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
1
1
11