Advertisement
Quick Links
EVBUM2306/D
MatrixCamt
Video Development Kit
User's Guide
Overview
MatrixCam Video Development Kit is a low power, smart 1080p
video streaming device over Wi-Fi
Internet of Things (IoT) market with an open architecture.
To make it an intelligent streaming device, PIR sensor is integrated
to detect movement and to wake up the system to start video
streaming. The system has the additional option for wake up through
®
Bluetooth
Low Energy (BLE). On wake up, a push notification is
sent to a mobile device alerting the user to view live stream or still
image indicating activity. The product will have different resolution
selection options for video streaming. The product supports
microSDt card slot and cloud service option for storage and playback
of images/video clips. The camera connects to a cloud service with
support for both video on demand (VOD) and live streaming.
Additionally, user will be able to configure the IoT device using
a GUI or mobile application. To receive the requests from this GUI,
an embedded HTTP server is provided in the IoT device.
The following features will be controlled by the GUI:
•
Network Configuration
•
Video Configuration
•
View Live Stream
•
Cloud Storage
•
microSD Card Recording and File List
•
Firmware Upgrade
Features
•
1/2.7-Inch 2.1 Mp/Full HD Digital Image Sensor: ON Semiconductor
AR023Z
•
High-Performance Digital Media System-on-Chip (DM SoC)
Processor: TI DaVinciDM368 SoC
•
Battery Power Supply Option: ON Semiconductor NCP1855 Battery
Charge Controller + LC709202F Industry State of Art Fuel Gauge
•
Supported Resolutions: 1920 × 1080, 1280 × 720, 640 × 360,
320 × 180
•
Supported Bitrates: 64 Kbps, 128 Kbps, 192 Kbps, 256 Kbps,
512 Kbps, 1 Mbps, 2 Mbps, 3 Mbps, 4 Mbps, 5 Mbps
•
Supported Frame Rates: 5, 10, 15, 20, 25, 30
•
Two Wake-Up Options: BLE (Bluetooth Application), PIR Motion
Detection
•
Record Images to microSD Card
•
Record Video Clips to microSD Card and Cloud
•
Firmware Upgrade through Web-GUI and microSD Card
•
File Recording in .AVI Format; Supporting Image Snapshot
© Semiconductor Components Industries, LLC, 2015
September, 2015 − Rev. 1
®
and Ethernet, targeting the
1
www.onsemi.com
EVAL BOARD USER'S MANUAL
Figure 1. MatrixCam VDK
•
Live Stream to Androidt and iOS
•
Support 2-Way Audio
•
Support Wireless Network
(Wi-Fi/802.11/b/g) Mobile
•
Multi-Level Users Management and
Passwords Definition
•
Support Multiple Network Protocols:
HTTP/TCP/IP/DDNS/SNTP/DHCP/FTP
Package Content
The MatrixCamt VDK contains the
following list of items:
•
Camera (1 pc)
•
LAN Cable (1 pc)
•
Micro-USB Cable (1 pc)
•
8 GB microSD Card & Adapter (1 pc)
Publication Order Number:
®
EVBUM2306/D
Advertisement
Related Manuals for ON Semiconductor EVBUM2306/D
Summary of Contents for ON Semiconductor EVBUM2306/D
- Page 1 Card Recording and File List • Firmware Upgrade Features • • ® 1/2.7-Inch 2.1 Mp/Full HD Digital Image Sensor: ON Semiconductor Live Stream to Androidt and iOS • AR023Z Support 2-Way Audio • • High-Performance Digital Media System-on-Chip (DM SoC)
- Page 2 EVBUM2306/D PC Hardware Requirements Product Views Minimum PC hardware requirements for proper Explanatory notes to Figure 2a−d: functionality of the MatrixCam VDK: 1. Mic Input • 2. LEDs Indicator (see Table 1 for More Details) CPU: 2.06 GHz or Above •...
- Page 3 EVBUM2306/D Hardware Instructions 3. Optionally, you can plug-in another micro-USB Follow the steps below to set up your MatrixCam VDK cable into the camera (Left-side view, slot 12) and hardware to ensure proper operation: then into USB slot in your PC for debugging via 1.
- Page 4 EVBUM2306/D Figure 3. LAN Network Adapter Settings (Windows) GUI Interface Initiation To access the GUI interface, first set up your local PC LAN network adapter. Windows System (Figure 3): 1. Go to Network and Sharing Center (Control Panel −> Network and Internet −> Network and Sharing Center).
- Page 5 EVBUM2306/D Linux System: 1. Open Network Connections to set up network settings (Figure 6). Go to System −> Preferences −> Network Connections. 2. Repeat the steps 2, 3, 4, 5 above to access the GUI log-in page. Administrator Login Enter your account and password on the log-in page as shown in Figure 4.
- Page 6 EVBUM2306/D Figure 8. The List of Users with Their Privileges Figure 9. System Page Visitor/Standard User Login System Settings The MatrixCam VDK allows up to 9 user accounts to be The basic system information is available in the “System” created besides the admin account. Only admin can change page.
- Page 7 EVBUM2306/D Network Settings − Static IP Address Network Settings − Steps to Enable Wi-Fi Streaming through GUI The MatrixCam VDK static IP address is 192.168.1.168 Follow the procedure below to enable Wi-Fi streaming by default. Follow the steps in section “GUI Interface through GUI: Initiation”...
- Page 8 EVBUM2306/D Network Settings − Steps for WAN Streaming 8. Get the Public IP WAN address for the router through GUI (establish WAN network connection before). Follow the steps below to access the GUI interface 9. Now user can access the board/live video from...
- Page 9 EVBUM2306/D d. If both the MatrixCam VDK and Android Device Steps to Enable Audio & Audio Settings Follow the steps below to enable audio (internal are on the same LAN: Enter the MatrixCam VDK microphone) on the MatrixCam VDK: IP address to see the live streaming from the 1.
- Page 10 EVBUM2306/D • Two-Way Audio (“Talkback”) Video Mode: High-Dynamic-Range (HDR) mode, The MatrixCam VDK features a “talkback” function, i.e. Linear mode • two-way audio streaming is possible. The talkback feature Compression Format: H.264 default can work only under Windows System using Internet •...
- Page 11 EVBUM2306/D Figure 15. Video Parameters Controls Taking Snapshots onto a microSD Card The GUI interface allows to take snapshots and 4. Insert microSD card (Class 6 or above) into consequently to save them onto a microSD card (Class 6 or microSD card slot.
- Page 12 EVBUM2306/D Figure 17. microSD Card Status and File List Video Recording onto a microSD Card Follow the steps below to record video onto a microSD 6. Go to “Recording” menu and check microSD card card: status information. You should see valid size 1.
- Page 13 EVBUM2306/D Push Notification Cloud Configuration This feature allows user to forward text notifications The “Cloud Configuration” tab allows user configuring (messages) to an Android/iOS based mobile device the cloud credentials (Figure 20). For more information (Figure 19). Follow the steps below to utilize push...
- Page 14 EVBUM2306/D Maintenance − Configuration • There are five configuration options available under “Restore” button: Click this button to restore all the “Config” screen in “Maintenance” (Figure 21): settings to the factory default values. • • “Save” button: Click this button to save the current “Upload”...
- Page 15 EVBUM2306/D Figure 23. MatrixCam VDK Firmware Upgrade (1 of 3) Figure 24. MatrixCam VDK Firmware Upgrade (2 of 3) Follow the steps below to upgrade system firmware: 8. Another screen will get opened indicating success 1. Access the GUI interface and go to “Maintenance”...
- Page 16 EVBUM2306/D Follow the steps to upgrade GainSpan Wi-Fi module 7. Now wait until the whole process is completed. firmware: Another screen will get opened indicating success 1. Access the GUI interface and go to “Maintenance” of the procedure. menu. 8. Wait for 60 seconds and let the system be 2.
- Page 17 EVBUM2306/D Figure 27. Battery Status Maintenance − Wi-Fi Calibration There is a provision of improving Wi-Fi performance and environment (temperature/channel congestion, etc.) and connectivity. Re-calibration might be needed if the there is mismatch with calibration data of the Wi-Fi module.
- Page 18 EVBUM2306/D APPENDIX Frequently Asked Questions (FAQs) No Changes Visible after Changing Settings in the GUI This chapter answers the most common FAQs and should Any change in the GUI setting has to be confirmed by be of help in case you experience some issues when using the “Apply”...
- Page 19 EVBUM2306/D Live Video Stream Cuts Out for 2−3 Seconds case you do not use/have a router, follow the steps below to When the live video stream is started (the web GUI is restore “IP Settings” back to static IP address: launched), either in a particular web-browser or VLC 1.
- Page 20 PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free ON Semiconductor Website: www.onsemi.com Literature Distribution Center for ON Semiconductor USA/Canada Order Literature: http://www.onsemi.com/orderlit 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Europe, Middle East and Africa Technical Support: Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada...