Advertisement
Network Settings − Steps for WAN Streaming
through GUI
Follow the steps below to access the GUI interface
remotely (WAN):
1. Access the GUI interface.
2. Go to "Configuration" menu.
3. Press "Network" tab.
4. Select "DHCP/Static IP Settings" depending upon
your router configuration.
5. Go to "Port Settings" tab and enable the check box
for "UPnP Port Forwarding" (WAN), Figure 11.
6. Click on "Apply/Save" tab and "OK" to confirm
the action.
7. Go to your router configuration page.
Using an Android Device to Connect to
the MatrixCam VDK
An Android device can be used to interact with the
MatrixCam VDK for the following functions:
Viewing the Live Stream
a. Install the VLC multimedia player to your Android
based mobile device from Google
(http://play.google.com/store/apps/details?id=org.
videolan.vlc&hl=en).
b. Connect Android based mobile device to Wi-Fi
ESSID of the same router connected to the
MatrixCam VDK.
c. Start up the VLC multimedia player and choose
"Open Network Stream" under "Media"
bookmark.
d. If both the MatrixCam VDK and Android Device
are on the same LAN: Enter the MatrixCam VDK
IP address to see the live streaming from the
MatrixCam VDK.
e. If the MatrixCam VDK has to be accessed from
the WAN: Enter the router WAN IP address
followed by RTSP port number (8551) in
"Network" section to see the live streaming from
the MatrixCam VDK.
EVBUM2306/D
Example: Let us consider user's router Public IP WAN
address is 180.59.64.34. Client can then access the
MatrixCam VDK by typing 180.59.64.34:8551 to
web-browser (it is assumed client's device is connected to
the same WAN network).
NOTE:
Figure 11. Network Page − Port Settings
Receiving Push Notifications
Please refer to the Cloud Integration Guide, "Cloud Push
Notification" section for more details (AND9264/D).
Waking Up the MatrixCam VDK using Bluetooth Low
Energy (BLE)
®
PlayStore
NOTE:
Using an iOS Device to Connect to the MatrixCam VDK
An iOS Device can be used to interact with the MatrixCam
VDK for the following functions:
Viewing the Live Stream
www.onsemi.com
8
8. Get the Public IP WAN address for the router
(establish WAN network connection before).
9. Now user can access the board/live video from
anywhere using that router Public IP WAN
address, followed by RTSP port (RTSP port
default is 8551).
It is assumed your LAN and WAN network is properly
configured using a 300 Mbps router (for instance TP-LINK)
when attempting WAN streaming through GUI.
a. Install the Nordic BLE App from the Google
PlayStore.
b. Wake up the MatrixCam VDK (see "MatrixCam
VDK Start-up" section for more details)
Recommended Android Devices are: Nexus 5/6/7.
a. Connect iOS based mobile device to Wi-Fi ESSID
of the same router connected to the MatrixCam
VDK.
b. Install the VLC multimedia player app from the
AppStore
(http://itunes.apple.com/us/app/vlc−
for−ios/id650377962?mt=8).
c. Start up the VLC multimedia player and choose
"Open Network Stream" under "Media" bookmark.
Advertisement
