Advertisement
Linux System:
1. Open Network Connections to set up network
settings (Figure 6). Go to
System −> Preferences −> Network Connections.
2. Repeat the steps 2, 3, 4, 5 above to access the GUI
log-in page.
Administrator Login
Enter your account and password on the log-in page as
shown in Figure 4. By default, administrator's username is:
admin and password is: admin. Click "Log in" to enter the
"Live view" screen (Figure 7). To change password, press
"Reset Password" icon located at the top right hand corner
of the page (Figure 7). Confirm the new password by
pressing "Apply" tab in the "Reset Password" page.
Changing the default administrator password is strongly
recommended at the first login.
EVBUM2306/D
Figure 6. LAN Network Adapter Settings (Linux)
Figure 7. Live View in the GUI
www.onsemi.com
5
Advertisement
