Advertisement
Taking Snapshots onto a microSD Card
The GUI interface allows to take snapshots and
consequently to save them onto a microSD card (Class 6 or
above). Follow the steps below to take snapshots:
1. Access the GUI interface and go to "Maintenance"
menu.
2. Press "SD Card" tab to start maintenance of your
microSD card (Figure 16).
3. Press "Remove" tab to unmount microSD card.
NOTE:
User can optionally unmount microSD card in the GUI
before insertion into microSD card slot.
EVBUM2306/D
Figure 15. Video Parameters Controls
Figure 16. microSD Card Maintenance
www.onsemi.com
11
4. Insert microSD card (Class 6 or above) into
microSD card slot.
5. Press "Mount" tab to mount microSD card.
6. Go to "Recording" menu and check microSD card
status information. You should see valid size
information and microSD card's status to be
connected (Figure 17).
7. Click on "Take Snap" tab to take a snapshot.
8. Click on "File List" tab and see snapshot (list of
snapshots) saved in JPG format (Figure 18).
Advertisement
