Advertisement
d. If both the MatrixCam VDK and Android Device
are on the same LAN: Enter the MatrixCam VDK
IP address to see the live streaming from the
MatrixCam VDK.
e. If the MatrixCam VDK has to be accessed from
the WAN: Enter the router WAN IP address
followed by RTSP port number (8551) in
"Network" bookmark to see the live streaming
from the MatrixCam VDK.
Waking Up the MatrixCam VDK using Bluetooth Low
Energy (BLE)
a. Install the Nordic BLE App from the AppStore.
b. Wake up the MatrixCam VDK (see "MatrixCam
VDK Start-up" section)
EVBUM2306/D
Steps to Enable Audio & Audio Settings
Follow the steps below to enable audio (internal
microphone) on the MatrixCam VDK:
Figure 12. Audio Configuration Settings
Figure 13. Talkback Feature
www.onsemi.com
9
1. Access the GUI interface.
2. Go to "Configuration" menu.
3. Press "Audio" tab (Figure 12).
4. Click to enable audio and configure encoding
technique used, sample rate, bit rate and
input/output volume.
5. Click on "Apply" tab and click on "OK" to
confirm the action.
6. Go back to "Live View" screen – audio should be
now ON (verify the internal MIC functionality).
Advertisement
