Presetting Stations - Dab And Fm; Recalling A Preset Station - Dab And Fm - Roberts RD-22 User Manual

Presetting stations - DAB and FM

There are 10 memory presets for each of the 2 wavebands.
1. Press the StandBy button to switch on your radio.
2. Tune to the required station as previously described.
3. Press and hold down the required Preset button until the display shows
e.g. "Preset 1 stored". The station will be stored under the chosen
preset button. Repeat this procedure for the remaining presets.
4. Stations stored in preset memories may be overwritten by following
the above procedure.

Recalling a preset station - DAB and FM

1. Press the StandBy button to switch on your radio.
2. Select the required waveband by pressing the Band button.
3. Momentarily press the required Preset button, your radio will tune to
the station stored in preset memory.
Note: If you have not previously stored a preset station and the preset
button is pressed "preset N empty" will be displayed.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
1
3
3
1
2
16