Manual Tuning - Fm - Roberts RD-22 User Manual

Manual tuning - FM

1. Press the StandBy button to switch on your radio.
2. Press the Band button to select the FM band. Fully extend the Tel-
escopic aerial.
3. Press the Tuning Up and Down buttons to tune to a station. The
frequency will change in steps of 50kHz.
4. When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
5. Set the Volume and 3D sound switch to the desired settings.
6. To switch off your radio press the StandBy button.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
1
3
3
5 5
5
2
5
6
14