Troubleshooting - HP 1410-24-R Getting Started Manual

Troubleshooting

This chapter lists issues and solutions while using and managing the switch. If you encounter an issue that
is not listed and you cannot solve it, contact HP Technical Support.
Table 6 Troubleshooting
Symptom
Power LED off
LAN interface LED off
Troubleshooting method
1. Verify that the correct power source is used and the power cords
are correctly connected.
2. Verify that the power source side provides power supply correctly.
1. Verify that the network cable is correctly connected to the network
port of the switch.
2. Plug the two ends of a network cable into two network ports of the
switch. If the port LEDs are on, it indicates that the network cable is
operating correctly. Otherwise, replace the network cable.
11