Setting The Clock Format - Roberts WM201 Owner's Manual

Setting the clock format

The clock display can be set to 12 or 24 hour format. The selected format
is then also used when setting the alarms.
1. Use the Select control to switch on your radio and to access the menus.
If needed, use the Back option to access the main Mode menu.
2. Rotate the Select control until the display says 'Configure'. Press and
release the Select control to enter the configure menu.
3. Rotate the Select control until 'Clock Setup' is highlighted on the
display. Press the Select control to enter the clock setup menu.
4. Rotate the Select control until 'Clock format' is highlighted on the
display. Press the Select control to enter the clock format menu.
5. Rotate the Select control to select either 24 hour or 12 hour format.
Press the Select control to confirm your choice of clock format.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Radio Stations
Media Player
Auxiliary input
Alarm clock
Configure
1-5
Aux Input Level
Backlight
Clock Setup
Set Time/Date
Clock Format
Clock format
Off
DST
24 12
42