Table of Contents
Advertisement
HOW TO COOK
COOK AT FULL POWER
PROGRAM COOKING
The oven will automaticallycook at full power (HI) unless
It is possibleto programthe oven to cook at two different
you select anotherpower level,
powerlevels.Forexample,you can set the ovento cookat
HIGH (Stage-t) to begin a cookingoperationor to bring
waterto a boil.Then, reduce the power level (Stage-2) to
To set:
continuethe operationat a slower,more gentlespeed.
1. Pressnumbersto entercooking
time.
(Ex. 2 3 0 or 2 minutes,30 seconds)
2. Press START/STOP to begin
To set:
STAGE-t
cooking.
1. PressCOOK.
2. Entercookingtimefor stage-f.
3. if desired,selecta powerlevel.
HINTS
To check food during cooking, open the oven door. When
I_1
the door is opened, the oven turns off and the display stops
counting down. Check food, close door and press START/
STOP to continue cooking.
STAGE-2
4. Press COOK again.
("mem" appears in the display.)
At the end of cooking, "END" appears in the display and 4
5. Enter cooking time for stage-2.
beeps sound. Open the oven door or press RESET. Time-
6. If desired, select a power level.
of_:lay reappears in the display when the door is opened or
7. Press START/STOP to begin
RESET is pressed,
cooking.
CHANGING THE POWER LEVEL
Powerlevel must be entered within 3 seconds afterpressing
POWER.The display returns to the cooking time after 3 sec-
During stage-l, the "cook" and "mem" prompts light in the
onds.
display to indicate that this is a 2-stage cooking operation.
The "mem" prompt turns off when the oven changes from
To set:
stage-1 to stage-2.2 beeps signalthis change. 4 beepssig-
1. Press numbers to enter cooking
nal the end of cooking.
time.
2. Press POWER.
3. Press a single number to enter
power level.
(Ex. 4 for 40% power.)
4. Press START/STOP to begin
cooking.
HINTS
Press POWER to recall the power level during cooking.
Power level will appear in the display for 3 seconds before
returning to the current timing.
Power level can be changed during cooking, while the oven
is operating. Press POWER then enter the power level.
Press POWER twice to cook at full power (HI).
-21-
Advertisement
Table of Contents
