3xLogic VX-2S-CPIR-W Quick Install Manual

Contents
§
Camera/Sensor
§
Pedestal Bracket Mount
§
12VDC Power Supply
§
Mounting Screws, Anchors & Template
§
Quick Install Guide
Mount the fixed tray to a solid surface using the
included mounting screws and template then re-
assemble the bracket mount. Mount in indoor,
climate-controlled locations only.
QUICK INSTALL GUIDE | V-Series Solution | VX-2S-CPIR-W
Additional Documentation Available at www.3xlogic.com:
§
User Manual
§
Installation Manual
§
Spec Sheet
Power can be supplied to the sensor using the
included 12VDC camera input/VAC wall plug-in
power adapter or using PoE supplied by a network
switch device. The device can be powered by both
for redundancy.
Warnings
§
If the product does not work properly, please contact your dealer.
Never attempt to disassemble the camera yourself. (3xLOGIC shall
not assume any responsibility for problems caused by
unauthorized repair or maintenance.)
§
To reduce the risk of fire or electrical shock, do not expose this
product to rain or moisture.
§
Installation should be made by a qualified service person and
should conform to all the local codes. Do not attempt to remove
the SD card with sharp or metal objects, as damage to the card
will occur and make it unusable.
Restoring Factory Defaults: While the device is powered
down press and hold the reset button. Power on the camera
while continuing to hold the reset button for 30 seconds then
release.
: