Configuring your Acer WPG
You will need to be connected to an Acer WPG to change any configuration
settings. Once you're connected, click the Configure button in the upper right-
hand corner of the Acer WPG screen.
Check this feature to enable projector identification. If this option is enabled, a
4-digit number will be displayed when the projector is started up, or when the
projector is not receiving any input.
Configuration password setup
Use this to set a password to restrict access to the configuration menus. This
is useful when the WPG is used by a number of people, and you do not wish
unauthorized persons to make any changes to the configuration.
The first time you click on this link, you will see the following: