Acer PD724 series Manual page 27

Acer projector user manual
Table of Contents

Advertisement

"H. Position", "V.
Position", "Frequency"
and " Tracking" func-
tions are not supported
under DVI and Video
mode.
"Sharpness" functions
is not supported under
DVI and Computer
mode.
"Signal Type" is only
available for Com-
ponent, HDMI and
SCART signal sources.
Rear-Ceiling
When you select this function, the projector reverses
and turns the image upside down at same time. You
can project from behind a translucent screen with
ceiling mounted projection.
H. Position (Horizontal Position)
Press the
to move the image left.
Press the
to move the image right.
V. Position (Vertical Position)
Press the
to move the image down.
Press the
to move the image up.
Frequency
"Frequency"changes the display data frequency to match the
frequency of your computer's graphic card. If you experience a
vertical flickering bar, use this function to make an adjustment.
Tracking
"Tracking" synchronizes the signal timing of the display with the
graphic card. If you experience an unstable or flickering image, use
this function to correct it.
Sharpness
Adjusts the sharpness of the image.
Press the
to decrease the sharpness.
Press the
to increase the sharpness.
Signal Type
Press the
or
button to change source to RGB, YPbPr or
YCbCr.
User Controls
Image
(Computer / Video
Mode)

... English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pd724wPd726wPd726 series

Table of Contents