Setting up your WPG
Check the LED for the power status.
• Red indicates that the WPG is receiving power, but is inactive.
• Green indicates that the WPG is being used to project images.
You may also like to connect a LAN cable to the LAN (RJ-45) port on the side of
the dongle. This will allow you to connect to the Internet to retrieve interactive
content or download firmware upgrades as they become available.
Connecting to the WPG for the first
If this is the first time you've connected to the WPG, you will need to
download and install the driver from the WPG. The software is stored on
the WPG, so there is no need for an installation CD. Ensure that you have
administrator-level permission on your computer so that you can install
To download the software, you must ensure that your browser is
set to open up a website. If your browser is set to open with a blank
page, you will not be able to download the software. To check this,
select Tools > Internet Options. Ensure that there is a website in
the text box.