Using the Remote Control
Refer to the "Power On/Off the Projector" section on pages
Aim the remote at the viewing screen, press and hold this
button to activate the laser pointer.
Automatically synchronizes the projector to the input source.
Press "Source" to choose RGB, Component-p, Component-i,
S-Video, Composite Video , DVI-D/A , HDTV and HDMI
Press "Freeze" to pause the screen image.
Momentarily turns off the video. Press "Hide" to hide image,
press again to restore display of the image.
Use this function to choose your desired aspect ratio.
Use this key to close the volume.
Four Directional Select Keys
selection for the OSD menu operation.
Adjusts image distortion caused by tilting the projector (±16
Press "Menu" to launch the on screen display menu. To exit
OSD, press "Menu" again.
Digital Zoom in/out.
Back to the previous step for the OSD menu operation.
Mouse / Mouse Right Click / Mouse Left Click
These functions are the same as a mouse of PC or Mac.These
functions are available only when the projector is connected to
a computer via an USB cable.
to select items or make adjustments to your