Preparing For Installation; Safety Recommendations - HP FlexFabric 5980 48SFP+6QSFP28 Installation Manual

Preparing for installation

Table 1 describes HPE FlexFabric 5980 Switch Series models, power supplies, and fan trays.
Table 1 HPE FlexFabric 5980 Switch Series models, power supplies, and fan trays
Product code
HPE FlexFabric 5980 switches
JQ026A
Power supplies
JC680A
JH336A
Fan trays
JH389A
JH388A
For regulatory identification purposes, the HPE FlexFabric 5980 48SFP+ 6QSFP28 switch is
assigned a regulatory model number (RMN). The RMN for the product is listed below. This regulatory
number should not be confused with the marketing name HPE FlexFabric 5980, or product code
JQ026A.
Product code
JQ026A

Safety recommendations

To avoid any equipment damage or bodily injury caused by incorrect use, read the following safety
recommendations before installation. Note that the recommendations do not cover every possible
hazardous condition.
•
Before cleaning the switch, remove all power cords from the switch. Do not clean the switch
with wet cloth or liquid.
•
Do not place the switch near water or in a damp environment. Prevent water or moisture from
entering the chassis.
•
Do not place the switch on an unstable case or desk. The switch might be severely damaged in
case of a fall.
•
Ensure good ventilation in the equipment room and make sure the air inlet and outlet vents of
the switch are not blocked.
•
Make sure the input voltage for the power supply is in the required range.
•
To avoid electrical shocks, do not open the chassis while the switch is operating or when the
switch is just powered off.
•
When replacing field replaceable units (FRUs), including power supplies and fan trays, wear an
ESD wrist strap to avoid damaging the units.
HPE description
HPE FlexFabric 5980 48SFP+ 6QSFP28
Switch
HPE 58x0AF 650W AC Power Supply
HPE FlexFabric Switch 650W 48V Hot Plug
NEBS-compliant DC Power Supply
HPE X712 Bck(pwr)-Frt(prt) HV2 Fan Tray
HPE X711 Frt(prt)-Bck(pwr) HV2 Fan Tray
RMN
BJNGA-AD0072
Alias
HPE 5980 48SFP+ 6QSFP28
650W AC power supply
650W DC power supply
X712 Bck(pwr)-Frt(prt) HV2 fan tray
X711 Frt(prt)-Bck(pwr) HV2 fan tray
Description
HPE FlexFabric 5980 48SFP+ 6QSFP28
Switch
1