Table of Contents
Advertisement
2.
Remove the power cord from the power supply. For a DC power cord, squeeze the tabs on the
power cord connector with your thumb and forefinger and pull the connector out, as shown in
Figure
21.
3.
Hold the handle on the power supply with one hand, pivot the latch on the power supply to the
right with your thumb, and pull the power supply part way out of the slot, as shown in
4.
Supporting the power supply bottom with one hand, slowly pull the power supply out with the
other hand.
5.
Put the removed power supply in an antistatic bag for future use.
6.
If you are not to install a new power supply, install a filler panel in the slot to ensure good
ventilation in the switch.
Figure 21 Removing the DC power cord
(1) Press the tabs on the power cord connector with your thumb and forefinger
(2) Pull the power cord connector out
1
2
19
Figure
22.
Advertisement
Table of Contents
