Table of Contents
Advertisement
Figure 22 Removing the power supply
(1) Pivot the latch to the right with your thumb
Connecting the power cords
WARNING!
Provide a circuit breaker for each power input. When you connect a power cord, make sure the
circuit breaker is switched off.
Connecting an AC power cord
1.
Insert one end of the AC power cord supplied with the power supply into the power receptacle
on the power supply.
2.
Use a cable tie to secure the power cord to the handle of the power supply, as shown in
23.
3.
Connect the other end of the power cord to an AC power source.
2
(2) Pull the power supply out
20
1
Figure
Advertisement
Table of Contents
