Table of Contents
Advertisement
14. Removal of LENS MOTOR and LENS
UNIT
1. Remove the Front Case Unit following "1. Removal of
FRONT CASE UNIT".
2. Remove the Top Case Assy following "2. Removal of
TOP CASE ASSY".
3. Remove the MAIN PCB ASSY following "3. Removal of
MAIN PCB ASSY".
4. Remove the Optical Unit following "4. Removal of
OPTICAL UNIT".
5. Remove the two (a) screws and the Lens Motor as
shown in Fig. 3-12.
6. Remove the four (b) screws and the Lens Unit as
shown in Fig. 3-12.
Lens Motor
a x2
Fig. 3-12
Lens Unit
b x4
19
Advertisement
Table of Contents
