3. Removal of MAIN PCB ASSY
1. Remove the Front Case Unit following "1.Removal of
FRONT CASE UNIT".
2. Remove the Top Case Assy following "2. Removal of
TOP CASE ASSY".
3. Remove the five (a) screws, the (b) screw and the (c)
screw and the Terminal Board as shown in Fig. 3-2-1.
4. Remove the two (d) screws and the (e) nut as shown
in Fig. 3-2-2.
5. Remove the Main Barrier as shown in Fig. 3-2-3.
6. Remove the two (f) screws and the Cooling Cover Top
as shown in Fig. 3-2-3.
7. Remove the eight (g) screws, the eleven connectors
(SC, SR, SG, SB, SP, SD, SA, SF, SL, SM and SZ) and
the MAIN PCB ASSY as shown in Fig. 3-2-3.
Terminal Board
Fig. 3-2-1
Fig. 3-2-2
Main Barrier
Cooling Cover Top
g
x8
MAIN PCB ASSY
SG
SL
Fig. 3-2-3
b x1
cx1
ax5
e x1
d x2
f x2
SZ
SB
SR
SD
SA
SC
SM
SP
SF
11