Mitsubishi S290U Service Manual page 28

5. Removal of TERMINAL PCB ASSY
1. Remove the Front Case Unit following "1. Removal of
FRONT CASE UNIT".
2. Remove the Top Case Assy following "2. Removal of
TOP CASE ASSY".
3. Remove the MAIN PCB ASSY following "3. Removal of
MAIN PCB ASSY".
4. Remove the five (a) screws and the Terminal Assy as
shown in Fig. 3-4-1.
5. Remove the six (b) screws, the three (c) screws and
detach the TERMINAL PCB ASSY from the Terminal
Holder as shown in Fig. 3-4-2.
a x5
Fig. 3-4-1
TERMINAL PCB ASSY
Terminal Holder
Fig. 3-4-2
Terminal Assy
c x3
b x6
13