Table of Contents
Advertisement
4. Removal of OPTICAL UNIT
1. Remove the Front Case Unit following "1. Removal of
FRONT CASE UNIT".
2. Remove the Top Case Assy following "2. Removal of
TOP CASE ASSY".
3. Remove the MAIN PCB ASSY following "3. Removal of
MAIN PCB ASSY".
4. Remove the two (a) screws and the PCB Holder A as
shown in Fig. 3-3-1.
5. Remove the five connectors (MH, MK, NM, A and B) as
shown in Fig. 3-3-1.
6. Remove the two (b) screws and the Lamp Power
Connector as shown in Fig. 3-3-1.
7. Remove the five (c) screws, raise the Optical Unit and
remove it as shown in Fig. 3-3-2.
12
A
PCB Holder A
a x2
MK
MH
Fig. 3-3-1
c x5
Fig. 3-3-2
b x2
Lamp Power
Connector
B
NM
Optical Unit
Advertisement
Table of Contents
