Subscribe to Our Youtube Channel
Related Manuals for UEi HA1
Summary of Contents for UEi HA1
- Page 1 INSTRUCTION MANUAL 1-800-547-5740 • Fax: (503) 643-6322 www.ueitest.com • email: info@ueitest.com...
-
Page 2: Safety Notes
• Use a current clamp adapter when measuring current that may exceed 10 amps. See the accessories in UEi’s full-line ca t a l o g • Do not open the instrument to replace batteries or fuses while the... -
Page 3: Operating Instructions
However, under some circumstances line voltage may GROUND, RUN and START continuity. In the “START” be present on the HA1 test cables when the control switches are in the (momentary action) position the start capacitor is connected to OFF position. - Page 4 CAUTION! plugged into a grounded 110 V AC receptacle or be grounded The white COM cable will be hot as soon as the HA1 line cord is con- through an external connection nected to 220 V AC. Always make sure that power to the HA1 is shut off...
- Page 5 10. Turn off the 220 V AC power source to the HA1. Connect the M a i n t e n a n c e white “COM” cable to the common terminal of the compressor motor. Periodic Service 11. Press, in turn, the “GROUND, TEST, START TEST, and RUN TEST”...
-
Page 6: Limited Warranty
Hermetic Compressor Analyzer Limited Warranty The HA1 is warranted to be free from defects in materials and workmanship for a period of three years from the date of purchase. If within the warra n ty period your instrument should become inoperative from such defects, the unit will be repaired or replaced at UE i ’ s option.
Need help?
Do you have a question about the HA1 and is the answer not in the manual?
Questions and answers