Table of Contents
Advertisement
MAINTENANCE
Porcelain Enamel (Exterior Finishes)
Clean with soap and water when parts are cool. All
• Mild soap and water,
spill-overs, especially acid spill-overs, should be
wiped up as soon as possible with a dry cloth,
NEVER WIPE A WARM OR HOT ENAMEL SURFACE
WITH A DAMP CLOTH. THIS MAY CAUSE
CRACKING AND CHIPPING. Never use abrasive or
caustic cleaning agents on exterior finish of range.
Porcelain enamel may crack or chip with misuse.
Surface Burners
When cook, clean burner as necessary with warm
• Soap and water,
soapy water and plastic scouring pad. Remove
• Plastic scouring pad.
stubborn soil by soaking and then scouring with a
• Powdered cleansers,
powdered cleanser or soap-filled scouring pad, Clean
• Soap-filled scouring pads.
ports with a straight pin. Do not enlarge or distort the
ports. Do not use a wooden toothpick. It may break
off and clog port. DQ NOT CLEAN BURNERS WITH
THE FOLLOWING CLEANERS: Caustic cleaners,
dishwasher detergent or metal polishes. These will
damage finish. To prevent permanent discoloration of
metal, do not clean burners in dishwasher. Burners
can be dried in the oven set on warm. CAUTION:
Burner and ventud tube must be dry before use.
Vinyl Finishes (Door Handle,
Never use abrasive or caustic cleaning agents on
Manifold Trim)
vinyl finish of range.
• Soap and water.
17
Advertisement
Table of Contents
