Routing Mode - Ringdale ISDN Router ISDN User Manual

If Default Gateway is Enabled, the prompt
Gateway Address
will appear.
Type an IP address of the form _ _ _ . _ _ _ . _ _ _ . _ _ _, where
each _ _ _ is a number ranging from 001 to 255, and press
the Enter key.
The Gateway Address is the IP address of a router or device that your
router will send packets to which have destinations it cannot determine
by static routing tables or by dynamic routing.
The prompt
Proxy ARP
may appear.
The default setting for Proxy ARP is Disabled.
Pressing the spacebar switches between Disabled and Enabled.
Choices:
• Enabled allows your router to respond to ARP
requests for devices on your Ethernet network that
do not have a static routing table or dynamic

routing mode.

• Disabled assumes that all devices on your Ethernet
network are capable of using your router for ARP
requests without the router having to mediate.
Press the Enter key when you are ready to continue.
CONFIGURING WITH A LOCAL CONSOLE
:
: Disabled
135