Ringdale ISDN Router ISDN User Manual page 102

CONFIGURING WITH A LOCAL CONSOLE
Task 2:
From the Setup Menu,
Press 1
to configure the router's operating system.
The prompt
Unit Designation
will appear at the bottom of the video display.
The default of Unit Designation is a unique name based on
the router's unique Ethernet network address. This will be
a series of numbers, or letters, appearing after the colon
above.
Choices:
• Type a new name for your router of up to ten letters
and/or numbers.
This name will appear in the Command Prompt and as the
router name in OverLAN Commander..
• Leave the current setting unchanged by not typing
anything.
Press the Enter key when you are ready to continue.
Configuring the Operating System
:
102