Ringdale ISDN Router ISDN User Manual page 11

Task 4: Connect the router through an NT-1 into
the ISDN phone jack.
Step 1:
Connect one end of the RJ45 cable into the BRI port on the
back of the router -- see figure 6.
CAUTION:
Be careful that you
the 10BASE-T port shown in the 10BASE-T Method in
Task 1.
Back of Router
Refer to the instructions
included with your NT-1,
an ISDN unit you purchase
separately
Figure 6
Step 2:
Connect the other end of the cable to the S/T interface on
the NT-1 -- see figure 6.
Task 4 is continued on the next page.
Power
Reset 10baseT 10base2
NT-1
INSTALLING the OverLAN ROUTER
DO NOT CONNECT
RJ45 cable
connect to
S/T interface of NT-1
this cable to
BRI Port
(ISDN Line)
11