Ringdale ISDN Router ISDN User Manual page 91

• Enable RIP allows the selected router to use dynamic
routing if RIP is available on the Ethernet network.
• Enable Poison RIP is only available if you turned on
Enable RIP. Enable Poison RIP is used if you want the
router to advertise that the remote network (selected
earlier in Task 3) is not available when the ISDN WAN
connection is not active.
Step 3: Setup a Static Routing Table.
You may want to create a Static Routing Table if IP Routing
is enabled. Static routing can be used in conjunction with
RIP.
Choose
The Static Routing Table is shown below:
Static Routing Table dialog box
CONFIGURING YOUR ROUTER
91