Ringdale ISDN Router ISDN User Manual page 87

CONFIGURING YOUR ROUTER
Step 15: Select Line Idle Detection to be on or off.
Select Line Idle Detection if the device being called is an
OverLAN router (or another type of router that is compatible
with Line Idle Detection). This option allows the selected
router to detect certain disruptions in the communications
link with the remote device and hangup. If you are not sure
whether the remote device supports Line Idle Detection,
disable this option.
You have finished configuring the ISDN/PPP parameters.
Task 4: Set up the Routing Options
You should determine the types of packets that will be
routed. Ask the Network Administrator if you are unsure.
The options from the Setup dialog box appear below:
From the Setup dialog box
At least one of the three routing options must be turned on,
but they may be used in any combination you choose.
Step 1: Select Bridge to be on or off.
The default for Bridge is off.
87