・When the count-number is 8 digits or more, press <SHIFT/▽> to change the upper digits and the
lower digits.
Pulse input number: 98765432
Prescale setting value: 50.001
「4938370365.432」
LED is lighting to
indicate it shows lower
digits.
[COUNT]
Lighting
*After reaching the full scale (99999999 x prescale value), the value reverts to 0 but continues to
measure.
How to enter preset value
・It is entered and set at preset setting mode of MODE1. (Refer to Setting Mode Explanation.)
How to Reset Count value
・Hold down <SET> and press <MODE> makes count value clear.
<SET>
<MODE>
Lower digits 8-digit
ON
OFF
ON
OFF
KW8M Eco-POWER METER (1A/5ACT input type)
Upper digits 5-digit
[COUNT]
Lighting
Reset
34
LED is lighting to
indicate it shows upper
digits.