Disconnecting Roger Devices (Newnet) - Phonak Roger Table Mic II User Manual

Disconnecting Roger devices (NewNet)

6.3
To disconnect your Roger
microphone from any
connected receivers or other
Roger microphones, hold the
Connect button for
7 seconds.
The indicator light will turn
7 secs
orange when your Roger
microphone has been
disconnected from all connected devices.
You can now start to re-connect Roger receivers or Roger
microphones with your Roger microphone.
Reset
If your Roger microphone stops responding to commands,
you can reset it by pressing the on/off and the Connect
button together for 10 seconds.
26 27