Using Additional Microphones - Phonak Roger Table Mic II User Manual

Using additional microphones

5.2
Additional table microphones are placed so that you can
hear the people seated around the table. Hand over any
wearable Roger microphones to your speakers. Make sure
they are worn properly (pointing to the mouth and within
20 cm / 8 inches).
The Roger microphones automatically detect when
someone talks, before instantly transmitting the voice to
your hearing aids.
If a speaker wearing a microphone wants to temporarily
leave the group, they should mute or turn off their
microphone.
22
If there is an issue with the network, press the
Connect button on one of the microphones to
reinitialize the network.
Microphone status lights
When using multiple Roger microphones, the following
feedback may be given by the indicator light:
The Roger microphone is muted. Unmute it
by pressing the on/off
mute off button on the remote control.
The Roger microphone has lost connection
to the other Roger microphone(s). Press the
Connect
network.
button or the
button to reinitialize the
23