Fisher FIELDVUE DLC3010 Instruction Manual page 30

Overview
October 2014
Process Temperature
Proc Temp Source— Manual or RTD
Proc Temp— indicates the process temperature.
Device Information
Identification
Follow the prompts on the Field Communicator display to view the following information.
D HART Tag— a unique name (up to eight characters) that identifies the physical instrument.
D Distributor— identifies the distributor of the instrument.
D Model— identifies the instrument model; ie. DLC3010.
D Device ID— each instrument has a unique Device Identifier. The Device ID provides additional security to prevent
this instrument from accepting commands meant for other instruments.
D Date— user­defined variable that provides a place to save the date of the last revision of configuration or calibration
information.
D Descriptor— a longer user­defined electronic label to assist with more specific controller identification that is
available with the HART tag.
D Message— user‐defined means for identifying individual controllers in multi‐controller environments.
Revisions
Follow the prompts on the Field Communicator display to view revision information.
D HART Universal Revision— the revision number of the HART Universal Commands which are used as the
communications protocol for the instrument.
D Field Device Revision— the revision of the protocol for interfacing to the functionality of the instrument.
D Firmware Revision— the revision number of the Fisher software in the instrument.
D Hardware Revision— the revision number of the Fisher instrument hardware.
D DD Information— the revision level of the Device Description used by the Field Communicator while communicating
with the instrument.
30
Instruction Manual
D102748X012