Parts List; Dlc3010 Digital Level Controllers - Fisher FIELDVUE DLC3010 Instruction Manual

Parts
October 2014

Parts List

Key Description
Note
Part numbers are shown for recommended spares only. For part
numbers not shown, contact your Emerson Process Management sales
office.

DLC3010 Digital Level Controllers

(figure 7‐1)
(1)
1 Transducer Module
2* Electronics Ass'y, includes alarm jumper (key 35) and
captive screws (key 36), header ass'y (key 38) and
encapsulated board
For use with transducer module 48B5739X012
(has obsolete Hall sensor on Flex circuit)
For use with transducer module GE18497X022
(has new Hall sensor on rigid boards)
Figure 7‐1. DLC3010 Digital Level Controller Assembly
21
2
1
NOTES:
1 INSTALL ALARM JUMPER (KEY 35) ON ELECTRONICS ASSEMBLY (KEY2) WHEN LCD METER (KEY 4) IS NOT INSTALLED.
2 LOCATION OF ALARM JUMPER (KEY 35) WHEN LCD METER (KEY 4) IS INSTALLED.
APPLY LUB/THREADLOCK
58B5510‐D
86
Key
3
4
Part Number
5*
6
7
8
9
21*
32
33
34
35
36
38
40
66
18B5529X022 67
18B5529X032 70
*Recommended spare parts
1. These parts are not replaced in the field due to serialization and characterization
issues, but can be replaced at a qualified service center. Contact your Emerson
Process Management sales office for additional information.
2. Included in small hardware spare parts kit.
3. Included in spare O‐rings kit.
4. Included in the Electronics Ass'y, key 2
5. Included in the LCD Meter Ass'y. key 4
Instruction Manual
Description
Cover Assy, includes O‐ring (key 21)
LCD Meter Ass'y, includes alarm jumper (key 35),
header ass'y (key 38) and captive screws (key 40),
and LCD Meter ass'y
Terminal Box Ass'y
Terminal Box Cover Ass'y, includes labels
(key 30 and 64) and set screw (key 31)
(2)
Screw, hex socket
Nameplate
Drive Screw, 18‐8 SST
(3)
O‐ring, nitrile
Adaptor Ring, A03600
Stud, SST (4 req'd)
Hex Nut, 304 SST (4 req'd)
(2)(4)(5)
Alarm Jumper
Screw, captive, 18‐8 SST
(4)
For electronics ass'y (2 req'd)
Header Assembly, dual row (not shown)
Screw, captive, 18‐8 SST
(5)
For LCD meter (2 req'd)
Anti‐Seize Sealant (not furnished with instrument)
Thread locking adhesive (medium strength)
(not furnished with instrument)
Lithium grease (not furnished with instrument)
D102748X012
Part Number
28B5738X012
28B5740X022
1K1810X0012
(2)(4)(5)
18B5732X012