Software Requirements; Inspection Upon Receipt - Trane Tracer Summit Hardware And Software Installation Manual

BMTW-SVN01F-EN

Software Requirements

The PC Workstation must have the following software installed:
Microsoft Windows 98, Windows ME, Windows NT 4.0 with Service
•
Pack 4, Windows XP, or Windows 2000
Internet Explorer Version 5 or higher
•
• Microsoft Data Access Components (MDAC) Version 2.7 Service
Pack 1 or higher (this is usually automatically installed with
Microsoft Windows)

Inspection Upon Receipt

Tracer Summit BCUs ship pre-configured from the factory based on the
model number ordered. Refer to "Model Number Description" on page 12.
BCUs may include the following:
Standard capacity card
•
Optional high capacity card
•
• Internal card options
• UCM communication cards
Optional local I/O module
•
Optional BCU operator display
•
All mounting accessories
•
The individual components are pre-installed in the BCU and are shipped
in the same package. Contact Trane for further information about the
BCU model number and individual part numbers. Also, see Figure 3 on
page 12.
A Tracer Summit PC Workstation package includes everything to run
Tracer Summit software. The package comes complete with the following:
• Tracer Summit software CD
• Complete set of Tracer Summit literature
You can order additional Tracer Summit PC Workstations and/or litera-
ture packages separately.
When unpacking these items, make sure that the documentation is not
lost or discarded with the packing material.
Although all items are inspected thoroughly before leaving the factory, it
is important to check them when they arrive at the job site to ensure that
the correct BCU panel was shipped and that no shipping damage
occurred. Use the Shipping Authorization papers to verify that all items
are present.
If the job site inspection reveals damage or material shortage:
1. Make the appropriate notation on the carrier's delivery receipt.
2. Immediately file a claim with the carrier and specify the extent and
type of damage/shortage found.
3. Notify the appropriate Trane sales office representative.
Inspection Upon Receipt
11