Device Addressing - Trane Tracer Summit Hardware And Software Installation Manual

Chapter 5 UCM Wiring and Addressing
124
Figure 58. ICS Connections Between the BCU and the VariTrac II CCP
on an Isolated Comm3 Link

Device Addressing

Each UCM must have a unique address on each link. VariTrac II CCPs
can have an address from 1 through 32. The address is set with the S2
DIP switches and must match the address that was set in Site Configura-
tion for Tracer Summit.
For details about setting the address, refer to the VariTrac II CCP lit-
•
erature.
For VariTrac II CCP DIP switch settings, refer to Table 23 on
•
page 125.
BMTW-SVN01F-EN